← Back to project

MedieInfo - MAX

Install the complete Project UNION firmware directly from your browser.
VersionU2.06
HardwareESP32-S3 Capacitive Touch LVGL Display 3.5″
Partition Scheme8M with spiffs
Flash Size16MB

Before installation

Important: Disconnect all external hardware. During installation, the board must only be connected to the computer by USB.
  1. Close Arduino IDE and all programs using the COM port.
  2. Connect the board directly to the computer with a USB data cable.
  3. Click Install Project and select the correct serial port.
  4. Keep this page open until installation is complete.

The existing flash content will be replaced.

Use Google Chrome or Microsoft Edge.The page must be opened through HTTPS.

Checking installation files…

manifest.json · firmware file